China Fun Sports CF-4600, Руководство пользователя

Страница: 14 / 15

TROUBLE SHOOTING
1. Change the battery . To change the computer battery ,please slide the computer from
the computer holder ,remove the battery cover on the back of the computer console,
and remove the batteries. Replace with 2Xaa batteries. Finally put the cover back on
the console, and slide the computer back on the computer holder.
2. Computer not working correctly . If your computer is not working correctly, please
check whether the lower sensor wire is connected to the upper sensor wire, and make
sure the upper sensor wire is plugged into the computer, When you have checked the
above, and the computer still not working, then please make sure the batteries are
installed correctly in the computer and the batteries are still working.
3. No resistance . If there is no tension resistance on the bike, please make sure the
upper tension cable is connected to the lower tension cable. Turn the tension knob
abti-clockwise to it’s lowest level. then go to the tension strap buckle which is situated
on top of the flywheel cover at the base of the front post. Loosen the tension strap, pull it
through the buckle until you can feel some resistance on the strap then lock it back
around the buckle. now mount the cycle and turn the pedals, the tension control knob
can now be used for a finer adjustment ,if you find it is now too tight to back to the
tension strap buckle and loosen the strap slightly.
MAINTENANCE
1. Before using the bike, always make sure all bolts/nuts are fully tightened
2. A spent battery is hazardous waste, please dispose of it correctly, and do not throw it
in the trash.
3. When eventually you want to scrap the machine, you should remove the batteries
from the computer, and dispose separately as hazardous waste.
12