
4.g
Instructions for use with wood
We recommend placing scrunched up paper or firelighters in the centre of the grate.
Arrange kindling in a tepee shape around it. Light the paper or firelighter. Once the
kindling is burning gradually increase the size of log until the fire is established. Only
burn seasoned wood.
Damp, impregnated or painted wood will damage the catalytic converter and tar up
your flue. Damp wood will also give reduced heat to room and cause more emissions.
THE AIR CONTROLS
To start
Pull both controls out to the open position and swing the boost disc up (the RH knob
will protrude approx 10mm further than the LH knob in the fully open position).
Once established
Close the boost disc.
You can now close the LH (primary) knob fully. The rate of burn is now controlled using
only the RH (secondary) knob. Your stove is smoke control compliant, meaning the RH
(secondary) knob is pre set to prevent it being completely shut down. This prevents
excessive smoke emissions. If you have the Woody Eco (Cat) you will observe the
catalytic converter glowing (see picture overleaf).
Making a fire - wood
Air Boost Disc (closed)
Secondary control knob
(right hand knob)
Main control for wood
Primary control knob
(left hand knob)
Main control for solid fuel
Page 41 of 60
www.
chilli
penguin.co.uk