background image

7

    

                                                       

Conversion To A Toddler Bed

Figure 8

AB20034_G12A

F

U

E

E

E

I

I

I

This Crib can be converted to a Toddler Bed for 

further use once it is no longer needed as a Crib. 

This can be accomplished by removing Allen Head 

Bolts (B) and Connector Nuts (H) which were 

installed during Step 2 to assemble the Long Foot

Assembly section of the Crib. Once these are 

removed, carefully remove the Long Foot Assembly 

(K). Then fill all emply holes in Foot Post Left (Q) 

and Foot Post Right (R) using Allen Head Bolts (E) 

and Connector Nuts (I). Install in three (3) empty 

holes in each Post as shown and thread securely 

together with Allen Wrenches (A).

Also attach Post Cap (U) to top of Foot Post Left 

(Q) and Foot Post Right (R) by aligning receiving 

holes in bottom face of Post Cap (U) with dowel pins 

in the top end of Foot Post Left (Q) and Foot Post 

Right (R). Then install Allen Head Bolts (F) through 

receiving hole in Post Cap (U) and thread into metal 

threaded insert in top of Foot Post Left (Q) and 

Foot Post Right (R). Tighten securely using Allen 

Wrenches (A).

See Figure 8.

Review WARNINGS for Toddler Bed.

 

WARNING

INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. 

Openings in and between bed parts can entrap head and neck of a small child. 

NEVER use bed with children younger than 15 months. ALWAYS follow assembly 

instructions.

 WARNING

STRANGULATION HAZARD: NEVER place bed near windows 

where cords from blinds or drapes may strangle a child. NEVER suspend strings 

over bed. NEVER place items with a string, cord or ribbon, such as hood strings 

or pacifier cords, around a child’s neck. These items may catch on bed parts.

 

CAUTION

ENTRAPMENT HAZARD: To avoid dangerous gaps, any  

mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. 

(1310 mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.

• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• Mattress MUST be moved into lowest position for proper positioning. 

 This crib contains all components necessary to convert to a toddler bed. However,   

   a guardrail may be available for purchase to provide additional security. Contact 

   Foundations

®

 for assistance. Refer to maintenance section for contact 

   information.

WARNINGS (For Toddler Bed)

Содержание Wadsworth 31301











Отзывы: