4
STEP 3
Figure 3
AB20034_G7
L
Assembly
from Step 1.
E
E
Note: Warning labels
are on outside face
of L and M.
M
P
O
STEP 4
Figure 4
AB20034_G8
D
View from bottom and
backside of crib.
H
Assemble Footboard Assembly (M) to Stationary
Side Assembly from Step 1. Use two (2) Allen Head
Bolts (E) which will be installed into their receiving
holes and then threaded into the metal threaded
insert in Stationary Post Right (P). Follow the same
procedure to attach Headboard Assembly (L) to the
opposite end of the Stationary Side Assembly from
Step 1 at Stationary Post Left (O).
Tighten all bolts securely.
See Figure 3.
Attach Stretcher Rail (S) between Headboard
Assembly (L) and Footboard Assembly (M) as
shown. A total four (4) Allen Head Bolts (D) and
four (4) Joint Connectors (H) will be required.
Joint Connectors (H) will be installed into receiving
holes in the back face of Stretcher Rail (S).
Rotate Joint Connector (H) as needed with a
straight screwdriver to align threads with Allen
Head Bolts (D).
Tighten all bolts.
See Figure 4.
