5
STEP 5
Figure 5
AB20034_G9
Long Foot Assembly
from Step 2.
E
E
E
E
Assembly
from Step 4.
Metal threaded
inserts in face
of Q and R.
.Attach Long Foot Assembly from Step 2 to the
assembly from Step 4. Use a total of four (4) Allen
Head Bolts (E) and follow the same process
described in Step 3 to attach the Headboard
Assembly (L) and Footboard Assembly (M) to
metal threaded inserts in Foot Post Left (Q)
and Foot Post Right (R).
See Figure 5.
Figure 6
AB20034_G10
I
G
G
G
I
I
I
1
2
3
G
STEP 6
Install Spring (N) with storage pouches on top into
assembled crib at height appropriate for intended
child (1, 2, 3).
Using Allen Bolts (G) and Connector Nuts (I) at
each corner of Spring, attach the mounting arms on
Spring (N) to the end rails on Headboard Assembly
(L) and Footboard Assembly (M). Allen Head Bolts
(G) will be installed through the hole in the mounting
arm and then into the receiving hole in Headboard
Assembly (L) and Footboard Assembly (M) while
Connector Nut (I) is installed through the outside
face of the receiving hole. Thread both Allen Bolts
(G) and Connector Nuts (I) together securely using
Allen Wrenches (A).
To adjust height of Spring (N), unthread Allen Head
Bolts (G) from Connector Nuts (I) at each corner of
Spring (N). Also remove Allen Head Bolts (G) and
described in Step 7) at the new selected height.
Move the Spring (N) to the new height location.
Then follow the same process described in this step
empty holes at the height where the Spring had
been located following the process described
in Step 7.
See Figure 6.
