Chiko CBA-1500AT3-HC-DSA-V1, Инструкция по эксплуатации

Страница: 56 / 70

Chapter
5Maintenance and Checkup
54
5.1.2
Replacing the Secondary Filter
IMPORTANT
•
Replace the secondary filter in an area where there is sufficient space for opening
the air inlet filter.
1.
Release the two snap locks on the filter
case on the intake side.
Open the filter case on the intake side.
2.
If the shaking arm stops at the center,
move to the end before removing the
guard, etc.
3.
Remove the two screws at the ends of
the shaking guard and remove the
guard.
4.
Remove the two screws at the ends of
the filter presser plate and remove the
plate.
5.
Remove the secondary filter.
6.
Install a new secondary filter.
7.
Close the filter case on the intake side
and secure with the snap locks after
reattaching the filter presser plate and
shaking guard with screws.
5.1.3
Replacing the Exhaust HEPA Filter and Activated
Charcoal Cassette
CAUTION
•
Avoid installing the filter inside out.
The frame of the filter grating should face the exhaust side.
IMPORTANT
•
The exhaust filter should be replaced in an area with a large free space.
1.
Release the two snap locks (on the right
and left) for exhaust port lid and remove
the exhaust port lid.
2.
Remove the exhaust filter.
Snap locks
Exhaust lid
Exhaust HEPA Filter
Secondary filter
Snap locks
Shaking arm
filter presser plate
shaking guard
filter case
on the intake side