Chiko CBA-1500AT3-HC-DSA-V1, Инструкция по эксплуатации

Страница: 51 / 70

Chapter 4Configuring Settings
【
MODE SELECT mode
】
CMN023-005
原本
(original instructions) 49
E
nglis
h
Chapter 4
Configuring Settings
【
MODE
SELECT mode
】
Screen Transitions in MODE SELECT Mode
To move to the MODE SELECT mode, press the MODE SELECT button during stoppage.
The Up/Down arrow buttons cycle through parameters.
Shaking Setting Mode
Sets the following items.
•
Shaking manual operation
“4.2.1 Manual Setting Mode for shaking” （ Page 49 ）
•
Setting the shaking time
“4.2.2 Time Setting Mode for shaking”
（
Page 50
）
•
Setting cumulative time until auto-shaking is activated
“4.2.3 Interval time Setting Mode for auto-shaking” （ Page 50 ）
4.2.1
Manual Setting Mode for Shaking
Shaking is performed manually when the unit is not in operation.
1.
Move to the MODE SELECT mode.
2.
Press the Up/Down arrow buttons to move to the shaking setting mode (“Shaking Set”).
3.
Press the ENTER button.
4.
Press the Up/Down arrow buttons to move to the shaking manual setting mode (“Shaking
Manual”).
5.
Press the ENTER button.
6.
The display shows “Shaking Start Y”.
7.
When the ENTER button is pressed, the shaking operation starts.
8.
To exit this mode, press the MODE SELECT button to return to normal mode.
[Com Setting]
[Volume Down ST]
[Other Setting]
[Error Data]
Communication Format Setting Mode
（
Page 50
）
Air Volume-Down Alert Timing Setting mode
（
Page 51
）
Other Setting Mode
（
Page 51
）
Error History Mode
（
Page 52
）
[Shaking Set]
Shaking Setting mode
（
Page 49
）