Chicco MYAMAKI COMPLETE, Руководство пользователя

Страница: 17 / 18

16 17
When the child, approximately at six months of age would
be able to keep both head straight and shoulders in vertical
position, can be carried on the side - hip.
The baby carrier can be positioned either on the parent’s
right or left side as s/he prefers.
The procedure for carrying the child on the right side is
illustrated below. Repeat the same steps in mirror-like manner
for the left side.
WARNING:
always fit the baby carrier onto your shoulders
before putting your child in.
HOW TO WEAR THE BABY CARRIER
Fasten the F belly belt acting on the relevant buckles (Figure
4A), and adjust the width acting on the G buckle (Figure 4B).
WARNING:
fasten the buckle by passing it inside the H
elastic band (Figure 4C).
17. Turn the belly strap by positing the seat on the right side
(Figure 17).
18. Fasten the padded saddle by fastening the left button
(Figure 18) in the relevant hole leaving the other side free
to fit the child later on.
19. Fasten the left shoulder strap with the buckle of the right
strap (Figure 19A), crossing it. Pass your head through the
ring (Figure 19B) so that, once in final position, it rests on
the left shoulder (Figure 19C).
HOW TO PLACE THE CHILD INSIDE THE BABY CARRIER
20. Place the child in the baby carrier (Figure 20A) and,
supporting fitted with your left hand, adjust the shoulder
strap already fitted using your right hand (Figure 20B).
Then close the padded saddle.
21. For improved wear and comfort of the baby carrier, rotate
the right shoulder strap fully on its axis (Figure 21A) and
let it slide below your armpit (Figure 21B). Then, fasten the
shoulder straps with the buckles of the left belt (Figure 21C)
and adjust the shoulder strap (Figure 21D). Make sure that
the baby carrier is positioned correctly as shown in Figure
21E.
HOW TO REMOVE THE CHILD FROM THE BABY CARRIER
WARNING:
it is a good idea to sit down to remove the child
from the baby carrier.
22. While supporting the child securely, free the shoulder
strap that goes below the armpit (Figure 22A) and open
the buttons of the padded saddle (Figure 22B) before
removing the child. Open the belly buckle only once
this step is completed by removing it from the fastening
elastic.
WARNING:
Hold your child safely while carrying out these
operations.
WARNING:
Before removing the child from the baby carrier,
make sure that you have completed the previous steps
correctly.
POSITION ON THE PARENT'S BACK USING THE MULTI-
PURPOSE REDUCER CUSHION
WARNING:
always fit the baby carrier onto your shoulders
before putting your child in.
HOW TO WEAR THE BABY CARRIER WITH THE REDUCER
CUSHION
Fasten the F belly strap of the baby carrier using the relevant
buckles (Figure 4A) adjust the width acting on the G buckle
(Figure 4B).
WARNING:
fasten the buckle by passing it inside the H
elastic band (Figure 4C).
Fasten both straps by acting on the J buckles (Figure 5).
Use a flat surface to facilitate fitting the reducer cushion
and the baby into the baby carrier. Then, position the multi-
function reducer cushion onto the baby carrier, making sure
you keep the C side of the reducer cushion facing upwards
(Figure 13).
Fasten the S elastic buttons on the upper side of the reducer
cushion with the L holes on the baby carrier's shoulder straps
(Figure 14).
Fasten the O poppers on the lower part of the reducer
cushion with the D poppers on the baby carrier's seat (Figure
15).
HOW TO PLACE THE CHILD INSIDE THE BABY CARRIER
Following the instructions below, you can place your child in
the baby carrier for the use of the transport position (on the
parent's back) without the help of
another adult.
WARNING:
It is recommended to place the child in the baby
carrier while sitting. In this way you can prevent any sudden
movements of the child.
WARNING:
Hold your child safely while carrying out these
operations.
WARNING:
Before fitting the child in the baby carrier, make
sure that you have completed the previous steps correctly.
Lay the child on the seat (Figure 16A) and fasten the E padded
saddle using the appropriate F buttons, and adjust to the
position best suited to the child's body, so that the padded
saddle is never too broad nor too narrow (Figure 16B).
Put on the baby carrier starting from the B shoulder straps
(Figure 9A).
The reducer cushion is equipped with a handy hood that
enables the baby to be better protected from the elements
during the sleep.
To use the hood, open the zip on the D side of the reducer
cushion, remove the hood and fasten the V elastic buttons on
the upper side of the hood to the L holes on the A side of the
baby carrier, as shown in Figure 10.
POSITIONING THE CHILD ON THE PARENT'S BACK
23. Pull the right arm from the shoulder strap and, passing it
through the inside of the baby carrier, grasp the opposite
shoulder strap with the same hand (Figure 23A), making
sure to hold it securely. Pull the left arm from the shoulder
strap as well and externally support your child in the baby
carrier carrycot (Figure 23B). Put your right arm, which is
holding the left shoulder strap, into the same shoulder
strap (Figure 23C) and start to rotate the baby carrier. The
baby carrier, attached to the belly strap, will turn with the
harness and will be positioned correctly on the back.
24. To complete the operation, slide the second arm into
the free shoulder strap (Figure 24A), so that the weight of
the baby carrier is distributed evenly over the back and
shoulders. Close the breastbone/scapular buckle L on the
breastbone (Figure 24B) and adjust all belts of the baby
carrier (Figure 24C).
HOW TO REMOVE THE CHILD FROM THE BABY CARRIER
25. Unfasten the breastbone/scapular buckle (Figure 25A),
remove one of the two shoulder straps and, holding the
baby firmly, also remove the second shoulder strap; rotate
the harness to bring the child in the front position (Figure
25B). At this point, wear the shoulder straps again (Figure
25C) to move back to the initial position.
WARNING:
Hold your child safely while carrying out these
operations.
WARNING:
Before removing the child from the baby carrier,
make sure that you have completed the previous steps
correctly.
The baby carrier, however, may also be used without the
reducer cushion, carrying out the steps described above
(except those pertaining to the aforementioned reducer
cushion).
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions
for use.
The warranty shall not therefore apply in the case of damages
caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please
refer to the specific provisions of national laws applicable in
the country of purchase, where provided.