Chicco 06620, Инструкция по эксплуатации

Страница: 39 / 220

38 39
SYMBOLS KEY
monophase alternate current
direct current
for indoor use only
Class II - double insulation
equipment
Conforms to applicable EC
directives and subsequent
amendments
ATTENTION. Read the instructions
for use
TROUBLESHOOTING
If you experience problems, please first check the following list and check that:
• Both units are on
• Both units are properly connected to the power socket via the mains adapter (1), or that batteries are
charged.
FAULT CAUSE SOLUTION
Parent unit
(receiver)/baby
unit (transmitter)
power and
link indicator
light (12)
off
- Baby unit (transmitter) and/or
parent unit (receiver) off in Baby
Monitor mode.
-Parent unit on in Reminder
mode
-Baby unit on in Music mode
with lullaby play in progress
- Baby unit on in Music mode,
connected to an MP3 player
- Baby unit Alkaline batteries
(not included) and/or parent
unit lithium-ion battery
completely discharged.
- Mains adapter disconnected or
not connected correctly.
- No mains voltage.
- If necessary, switch on the baby unit (transmitter)
and/or the parent unit (receiver) in Baby Monitor
mode.
-Ensure that the display switches on. If this is on,
the product is working in Reminder mode. Switch
off and then switch back on in Baby Monitor mode.
- Verify lullaby play. Switch off and then switch
back on music play in Baby Monitor mode.
-Verify music play. Switch off and then switch back
on in Baby Monitor mode.
- Replace Alkaline batteries
in the baby unit and/or charge rechargeable
lithium-ion battery in the parent unit
- If the units are powered via mains adapter,
verify that this device is
correctly connected to a mains outlet
- Check that the outlet is being powered.
The parent
unit (receiver)
does not
emit any sounds.
- No discernible sounds are
arriving to the baby unit
(transmitter)
- The voice activation function
has been selected
- Parent unit (receiver) volume
set at minimum
- Baby unit Alkaline batteries
and/or parent unit lithium-ion
battery completely
discharged
- The parent unit (receiver) may
be off in Baby Monitor mode.
- The parent unit (receiver) may
be on in Reminder mode.
- Just as soon as discernible sounds from the
environment are present, the transmitter will be
activated. In
any case, for peace of mind, test
transmission with the help of another person
who can try to speak in the room the baby unit
(transmitter) is on.
- Check the position of the voice activation or
continuous transmission ON/OFF selector.
If the selector is set to ON, the voice activation
function is active.
As soon as sounds present in the baby unit
environment exceeds the threshold for voice
activation, the parent unit will emit sounds.
- Adjust parent unit (receiver) volume
until sounds are audible, pressing
the + volume adjustment button (6).
- Replace Alkaline batteries
in the baby unit and/or charge lithium-ion battery
in the parent unit
- Switch on the parent unit (receiver) in Baby
Monitor mode.
-If the power and link indicator light (12) is off
and the display is on, the product is working in
Reminder mode. Switch off and then switch back
on in Baby Monitor mode.