SKU 94560
For technical questions, please call 1-800-444-3353
PAGE 6
Before using the Jigsaw, check to make sure the Saw Blade is properly
mounted on the Blade Chuck.
Make sure the Saw Blade is sharp, and is not
cracked or bent.
Industrial applications must follow OSHA guidelines.
When cutting a large workpiece, make sure its entire length is properly sup-
ported.
If necessary, use a roller stand (not included).
When using the Jigsaw, always maintain a firm grip on the tool with both
hands.
Do not use the Jigsaw if it has been dropped, damaged, left outdoors, or
immersed in liquid.
To avoid electrical shock, do not handle the Jigsaw or its Power Cord Plug
with wet hands.
To avoid injury, always wear heavy duty work gloves when changing Saw
Blades.
Make sure the workpiece is free from nails and any other foreign objects
which can damage the Saw Blade.
Always check to make sure there are no electrical wires or cables in the
cutting path of the Jigsaw.
Allow the Saw Blade to run up to full speed before feeding it into a
workpiece.
When turning off the Jigsaw, allow the Saw Blade to stop on its own.
Do not press against the Saw Blade to stop it.
Turn off the Jigsaw and allow the Saw Blade to completely stop if the
Saw Blade is to be backed out of an uncompleted cut.
Never attempt to remove material stuck in the moving parts of the Jigsaw
while it is plugged in and running.
Always ensure the Laser Beam is aimed at a sturdy workpiece without a
reflective surface.
Bright, shiny, reflective workpieces are not suitable for Laser
use as the surface could reflect the beam back at the operator.
Always unplug the Jigsaw from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
