SKU 94560
For technical questions, please call 1-800-444-3353
PAGE 12
ASSEMBLY INSTRUCTIONS
To Install A Saw Blade:
1.
CAUTION!
Always make sure the Power Switch (29) of the Jigsaw is in its
“OFF”
position and the tool is unplugged from its electrical outlet prior to adding
any accessories or making adjustments to the tool.
2.
Refer to the Chart below to select the proper Saw Blade (68, 69) for the material
being cut.
(See Figure F.)
3.
Open the Plastic Blade Guard (58). Press the clamp button on the Blade Chuck
(24). Insert the Saw Blade (68, 69) as far as it will go, making sure the teeth of
the Saw Blade face to the front of the tool. Then release the clamp button on the
Blade Chuck, and close the Plastic Blade Guard.
(See Figure G.)
PLASTIC BLADE GUARD
(58)
SAW BLADE
(68, 69)
BLADE CHUCK
(24)
FIGURE G
BLADE SELECTION AND SUITABLE SPEED
Material
Teeth Per Inch
Speed Setting
Soft Wood
6
6
Hardwood
6
5
Plastic
12
4 ~ 6
Aluminum
12
3 ~ 6
Steel
24
2 ~ 4
Tile
24
1 ~ 3
Glass
32
1 ~ 3
Leather
(Knife Edge)
4 ~ 6
Rubber
(Knife Edge)
4 ~ 6
FIGURE F
