background image

SKU 94560        

 For technical questions, please call 1-800-444-3353 

PAGE 3

ELECTRICAL SAFETY

4. 

Grounded tools must be plugged into an outlet properly installed and 
grounded in accordance with all codes and ordinances.  Never remove the 
grounding prong or modify the plug in any way.  Do not use any adapter  

 

plugs.  Check with a qualified electrician if you are in doubt as to whether    
the outlet is properly grounded.

  If the tools should electrically malfunction or    

break down, grounding provides a low resistance path to carry electricity away    
from the user.

5. 

Double insulated tools are equipped with a polarized plug (one blade is  

 

wider than the other).  This plug will fit in a polarized outlet only one way.  If   
the plug does not fit fully in the outlet, reverse the plug.  If it still does not    
fit, contact a qualified electrician to install a polarized outlet.  Do not 
change the plug in any way.

  Double insulation   eliminates the need for the    

three wire grounded power cord and grounded power supply system.

6. 

Avoid body contact with grounded surfaces such as pipes, radiators, rang-
es, and refrigerators.  

There is an increased risk of electric shock if your body is 

grounded.

7. 

Do not expose power tools to rain or wet conditions.  

Water entering a power  

tool will increase the risk of electric shock.

8. 

Do not abuse the Power Cord.

  

Never use the Power Cord to carry the tools 

or pull the Plug from an outlet.  Keep the Power Cord away from heat, oil, 
sharp edges, or moving parts.  Replace damaged Power Cords immediately.

  

Damaged Power Cords increase the risk of electric shock.

9. 

When operating a power tool outside, use an outdoor extension cord 
marked “W-A” or “W”.  

These extension cords are rated for outdoor use, and 

reduce the risk of electric shock.

PERSONAL SAFETY

 

10. 

Stay alert.  Watch what you are doing, and use common sense when operat-
ing a power tool.  Do not use a power tool while tired or under the influence 
of drugs, alcohol, or medication.

  A  moment of inattention while operating 

power tools may result in serious personal injury.

11. 

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.     
Keep your hair, clothing, and gloves away from moving parts.

  Loose clothes, 

jewelry, or long hair can be caught in moving parts.

Содержание Chicago 94560

















Отзывы: