SKU 66523
For technical questions, please call 1-800-444-3353.
Page 6
Maintain labels and nameplates on
5.
the equipment. These carry impor-
tant information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
Have the equipment serviced by a
6.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the equip-
ment is maintained. Do not attempt
any service or maintenance proce-
dures not explained in this manual
or any procedures that you are un-
certain about your ability to perform
safely or correctly.
Store equipment out of the reach of
7.
children.
Follow scheduled Engine and equip-
8.
ment maintenance.
Refueling Precautions:
9.
Do not smoke, or allow sparks,
•
flames, or other sources of ignition
around the equipment, especially
when refuelling.
Do not refill the Fuel Tank while the
•
engine is running or hot.
Do not fill Fuel Tank to the top.
•
Leave a little room for the fuel to
expand as needed.
Refuel in a well-ventilated area only.
•
SAvE THESE INSTRuCTIONS.
GENERATOR
PRECAuTIONS
Set up:
Do not connect the Generator directly
1.
into a home’s utility electrical line. Do
not plug this Generator into an outlet
in the home. Connecting a generator
directly to a utility power supply can
“back feed” along the power lines and
kill or injure utility workers working on
the lines.
All connections and conduits from
2.
the Generator to the load must only
be installed by trained and licensed
electricians, and in compliance with
all relevant local, state, and federal
electrical codes and standards, and
other regulations where applicable.
The Generator must be earth-ground-
3.
ed in accordance with all relevant
electrical codes and standards before
operation.
A 10-gauge copper wire should be
•
used to connect the ground termi-
nal of the Generator to a grounding
rod. A wire that is too thin may not
provide sufficient electrical current
carrying capacity to be an adequate
ground path.
The other end of the ground wire
•
must be securely fastened to an
approved ground source. Refer to
local regulations for ground source
information. If unsure of regulations
or procedures, obtain assistance
from a licensed or certified electri
-
cian.
Insulate all connections and discon-
4.
nected wires.
