Chicago Electric 66516 Скачать руководство пользователя страница 24

SKU 66523 

For technical questions, please call 1-800-444-3353. 

Page 24

LIMITEd 1 YEAR / 90 dAY 

WARRANTY

Harbor Freight Tools Co. makes every effort to 

assure that its products meet high quality and durabil-

ity standards, and warrants to the original purchaser 

that for a period of ninety days from date of purchase 

that the engine/motor, the belts (if so equipped), 

and the blades (if so equipped) are free of defects 

in materials and workmanship. Harbor Freight Tools 

also warrants to the original purchaser, for a period 

of one year from date of purchase, that all other parts 

and components of the product are free from defects 

in materials and workmanship (90 days if used by 

a professional contractor or if used as rental equip-

ment).  This warranty does not apply to damage due 

directly or indirectly, to misuse, abuse, negligence or 

accidents, repairs or alterations outside our facili-

ties, normal wear and tear, or to lack of maintenance. 

We shall in no event be liable for death, injuries to 

persons or property, or for incidental, contingent, 

special or consequential damages arising from the 

use of our product. Some states do not allow the 

exclusion or limitation of incidental or consequential 

damages, so the above limitation of exclusion may 

not apply to you.  THIS WARRANTY IS ExPRESSLY 

IN LIEU OF ALL OTHER WARRANTIES, ExPRESS 

OR IMPLIED, INCLUDING THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the prod-

uct or part must be returned to us with transporta-

tion charges prepaid. Proof of purchase date and an 

explanation of the complaint must accompany the 

merchandise. If our inspection verifies the defect, we 

will either repair or replace the product at our elec-

tion or we may elect to refund the purchase price 

if we cannot readily and quickly provide you with a 

replacement. We will return repaired products at our 

expense, but if we determine there is no defect, or 

that the defect resulted from causes not within the 

scope of our warranty, then you must bear the cost of 

returning the product.

This warranty gives you specific legal rights 

and you may also have other rights which vary from 

state to state.

3491 Mission Oaks Blvd.

PO Box 6009  •  Camarillo, CA 93011

(800) 444-3353

EMISSION CONTROL 

SYSTEM WARRANTY

California and united States Emission Control 

defects Warranty Statement

The California Air Resources Board (herein CARB), the 

United States Environmental Protection Agency (herein EPA), 

and Harbor Freight Tools (herein HFT) are pleased to explain the 

emission control system warranty on your 1995 and later Small 

Off-Road Engine (herein engine). In California, the engine must 

be designed, built and equipped to meet the State’s stringent 

anti-smog standards.  Elsewhere within the United States, new 

off-road, spark-ignition engines certified for model year 1997 and 

later, must meet similar standards set forth by the EPA.  HFT 

must warrant the emission control system on your engine for 

the periods of time described below, provided there has been no 

abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts such as the 

carburetor or fuel-injection system, and the ignition system. Also 

included may be hoses, belts, connectors and other emission-

related assemblies.

Where a warrantable condition exists, HFT will repair your 

engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

The 1995 and later engines are warranted for two 

(2) years.  If any emission-related part on your engine is 

defective, the part will be repaired or replaced by HFT.

Harbor Freight Tools Emission Control defects 

Warranty Coverage

Engines are warranted for a period of two (2) years 

relative to emission control parts defects, subject to the 

provisions set forth below. If any emission related part 

on your engine is defective, the part will be repaired or 

replaced by HFT.

 

Owner’s Warranty Responsibilities

As the engine owner, you are responsible for the 

• 

performance of the required maintenance listed in 

your Owner’s Manual. HFT recommends that you 

retain  all  receipts  covering  maintenance  on  your 

engine,  but  HFT  cannot  deny  warranty  solely  for 

the lack of receipts or for your failure to ensure the 

performance of all scheduled maintenance.
As the engine owner, you should, however, be aware 

• 

that HFT may deny you warranty coverage if your 

engine or a part has failed due to abuse, neglect, im-

proper maintenance, or unapproved modifications.

You are responsible for shipping your engine to a 

• 

HFT warranty station as soon as a problem exists.  

Contact the HFT Customer Service department at 

the number below to make shipping arrangements.  

The warranty repairs should be completed in a rea-

sonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty 

rights and responsibilities, you should contact the Harbor 

Содержание 66516


























Отзывы: