SKU 66523
For technical questions, please call 1-800-444-3353.
Page 7
Connect the Generator only to a load
5.
or electrical system (120 VAC or
12 VDC) that is compatible with the
electrical characteristics and rated
capacities of the Generator.
Set up the Generator outdoors in a
6.
well-ventilated, dry area, away from
building air intakes. The Genera-
tor should be protected from direct
exposure to rain and snow. Do not
set up the Generator on a conductive
surface such as a metal deck.
Operation:
Do not attempt to connect or discon-
1.
nect load connections while standing
in water, or on wet or soggy ground.
Do not touch electrically energized
2.
parts of the Generator and intercon-
necting cables or conductors with any
part of the body, or with any
non-insulated conductive object.
Use only Class BC or Class ABC fire
3.
extinguishers on electrical fires.
Do not overload the Generator.
4.
Overloading can cause fires in the
electrical cords, in addition to Gen-
erator and appliance damage.
Service:
Keep all electrical equipment clean
1.
and dry. Replace any wiring where
the insulation is cracked, cut, abrad-
ed, or otherwise degraded. Replace
terminals that are worn, discolored, or
corroded. Keep terminals clean and
tight.
BASIC SPECIFICATIONS
Fuel
Type
91+ octane unleaded
gasoline
Capacity
1.3 Gallons
Engine Oil
Type
SAE 10W-30
Capacity
13.5 Ounces
Note:
Additional specifications found in
the TECHNICAL ENGINE SPECIFI-
CATIONS chart in this manual.
The emission control system for
this Generator’s Engine is warranted for
standards set by the U.S. Environmental
Protection Agency and by the California Air
Resources Board (also known as CARB).
For warranty information, refer to the last
pages of this manual.
At high altitudes, the engine’s carbu-
retor, governor, and any other parts that
control the fuel-air ratio will need to be
adjusted by a qualified mechanic to allow
efficient high-altitude use and to prevent
damage to the engine and any other de-
vices used with this product.
uNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
OPERATING INSTRuCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
