SKU 42933
For technical questions, please call 1-800-444-3353.
Page 7
essential Straight push-stick Features and
Functions
note:
Straight style (traditional) stick shown. A dif-
ferent stick design may be used if it properly
protects against all hazards.
Diagram not to scale.
Push sticks must be made from sturdy, defect-free,
•
plywood or normal wood to prevent unexpected
breakage. Material must be at least 1/4” thick ,but
no thicker than the finished wood.
Inspect push stick before use and do not use a
•
damaged or deteriorated push stick.
Push stick dimensions will vary depending
•
on the application and user.
Handle notch
Must be far
•
enough down
the stick to allow
a comfortable and
firm grip.
Must be deep enough
•
to prevent hand from
slipping down the
stick.
Do not cut more than
•
halfway into the stick
to prevent weakening.
Corners may be
•
rounded to increase
comfort.
Stick Length
Must be long enough
•
to prevent accidental
blade contact.
At least 6” from end of
•
handle to closest part
of notch.
notch
Must be right angle cut 30°-40° from the angle of the stick to
•
keep hands out of the line of the blade.
The lower lip of the notch must be no longer than the workpiece
•
is thick.
At Least 6”
Less than
workpiece
thickness
