Chicago Electric 42933 Скачать руководство пользователя страница 5

Страница: 5 / 24

SKU 42933

For technical questions, please call 1-800-444-3353.

Page 5

NEVER LEAVE TOOL RUNNING

21.

UNATTENDED. TURN POWER OFF.

Don’t leave tool until it comes to a

complete stop.

gROunDIng InStRuctIOnS

tO pReVent

eLectRIc SHOck

AnD DeAtH FROM

IncORRect gROunDIng

WIRe cOnnectIOn

ReAD AnD FOLLOW tHeSe

InStRuctIOnS:

110-120 V~ grounded tools: tools

with three prong plugs

In the event of a malfunction or

breakdown, grounding provides a

path of least resistance for electric

current to reduce the risk of electric

shock. This tool is equipped with an

electric cord having an equipment-

grounding conductor and a ground-

ing plug. The plug must be plugged

into a matching outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.
Do not modify the plug provided – if it

will not fit the outlet, have the proper

outlet installed by a qualified electri

cian.
Improper connection of the equip-

ment-grounding conductor can re-

sult in a risk of electric shock. The

conductor with insulation having an

outer surface that is green with or

without yellow stripes is the equip-

ment-grounding conductor. If repair

or replacement of the electric cord or

plug is necessary, do not connect the

equipment-grounding conductor to a

live terminal.

Check with a qualified electrician or

service personnel if the grounding

instructions are not completely under-

stood, or if in doubt as to whether the

tool is properly grounded.
Use only 3-wire extension cords that

have 3-prong grounding plugs and

3-pole receptacles that accept the

tool’s plug.
Repair or replace damaged or worn

cord immediately.

125 V~ 3-prong plug and Outlet

(for up to 125 V~ and up to 15 A)

grounding

pin

This tool is intended for use on a cir-

cuit that has an outlet that looks like

the one illustrated above in

125 V~

3-prong plug and Outlet

. The tool

has a grounding plug that looks like

the plug illustrated above in

125 V~

3-prong plug and Outlet

The outlet must be properly installed

and grounded in accordance with all

codes and ordinances.
Do not use an adapter to connect this

tool to a different outlet.

Radial Arm Saw Safety Warnings

For Your Own Safety Read Instruction

Manual Before Operating Saw

DAngeR! coasting cutting tool

can Be Dangerous – Apply brake

immediately to stop cutting tool

when the switch is turned off.

Содержание 42933

























Результаты поиска

Содержание 42933

Отзывы:

Похожие инструкции для 42933

Бренды по названию

Популярные бренды

Chicago Electric 42933, Руководство по установке и эксплуатации

Результаты поиска

Содержание 42933

Отзывы:

Похожие инструкции для 42933

Бренды по названию

Популярные бренды