background image

pLeASe ReAD tHe FOLLOWIng cAReFuLLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL 

AS A  REFERENCE TOOL  ONLY.    NEITHER THE  MANUFACTURER  NOR  DISTRIBUTOR  MAKES ANY 

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO 

MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS 

OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT 

ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED 

TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT 

OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARIS-

ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

LIMIteD 90 DAY WARRAntY

Harbor Freight Tools Co. makes every effort to assure that its products meet high 

quality and durability standards, and warrants to the original purchaser that this product 

is free from defects in materials and workmanship for the period of 90 days from the date 

of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, 

abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, 

improper installation, normal wear and tear, or to lack of maintenance. We shall in no event 

be liable for death, injuries to persons or property, or for incidental, contingent, special or 

consequential damages arising from the use of our product. Some states do not allow the 

exclusion or limitation of incidental or consequential damages, so the above limitation of 

exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTH-

ER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MER-

CHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with 

transportation charges prepaid. Proof of purchase date and an explanation of the complaint 

must accompany the merchandise. If our inspection verifies the defect, we will either repair 

or replace the product at our election or we may elect to refund the purchase price if we 

cannot readily and quickly provide you with a replacement. We will return repaired prod-

ucts at our expense, but if we determine there is no defect, or that the defect resulted from 

causes not within the scope of our warranty, then you must bear the cost of returning the 

product.

This warranty gives you specific legal rights and you may also have other rights which 

vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

Содержание 42933

























Отзывы: