36
9. TROUBLESHOOTING
9.1
Product Disposal
Dismantle the machine, separating the parts following the instructions given in this manual.
You must group the parts according to the materials they are made of: iron, aluminium, copper, plastic
and rubber.
The parts must be disposed of by the relative centres in full compliance with the laws and force on the
matter of dismantling and demolishing industrial waste.
Waste Oil:
to dispose of waste oil abide by the laws for protecting the environment and the laws in force
in the Country where the machine is used.
9.2
Troubleshooting
Abnormality
Probable Reason
Solution
The oil leakage from
the seal,
1.
The stiffening of the seals due
to longtime storage.
2.
The seals are damaged or
corroded.
1.
The area must be cleaned, after
several hours operating,it must
be controlled that whether there
is leakage or not.
2.
Consult to the technical service.
Vibration and / or
excess noise,
1.
Inner abnormality.
2.
The gear unit is not mounted
correctly. (non-
fixed)
1.
Control the
fi
xing.
2.
Consult to the technical service.
If it stopped due to the
located/assembled brake
connection discontinuity,
1.
Not pressure at the brake.
2.
Disc is squeezed because of the
located period (damaged).
3.
Brake seals are out of order
1.
Brake connection must be
controlled.
2.
Implement pressure and exercise
motion to the brake entrance.
3.
Consult to the technical service.
Overheating,
1.
The oil is
insufficient
2.
The brake is not completely open
3.
High thermic power.
1.
Add oil.
2.
Opening pressure must be
controlled.
3.
Consult to the technical service.
Activated/Operated motor's
failure of to rotate the gears
of the gear unit,
1.
Motor mountage error.
2.
The brake is locked.
3.
Inner abnormality.
1.
The connection between motor
and gear unit must be controlled.
2.
Brake system must be controlled.
3.
Consult to the technical service.
If the located brake is
locked,
1.
Circuit residual pressure.
2.
Discs are corroded.
1.
Hydraulic circuit must be
controlled.
2.
Consult to the technical service.
If there are problems or malfunctions different to the onesdescribed here contact a CHIARAVALLI Assistance Centre.
