5
1.
GENERAL INFORMATION
1.5
1.5.1
1.5.2
1.5.3
Transportation
Transportation And Freightage
;
●
Take into consideration of the article stated on package during the product delivery.
●
During the delivery, product should be controlled about possible damages in carrying period.
●
The firm should be informed about possible
damagesr.
●
The damaged products should not be put into use.
●
Lifting flanged eyebolts must be tightened.These flanged eyebolts sized to carry the
weight of only gear unit/
g
ear unit with motor. The additional weight should not be added. The flanged eyebolts suitable to the DIN
580 norm.
●
If there are 2 lifting flanged eyebolts in gear unit with motor, both of them could be used in carrying
process
upon the size of gear unit and motor. In necessary situations, the suitable and adequated-size carrier should
be used.
●
Carrying safeties should be removed before the start of operating.
●
The weights of the movable gear units/gear units with motors are placed in product catalogues.
●
The dangerous area should be got into the secure to prevent damage to the persons.
●
During the carrying process, to stand under the gear unit could cause danger of death.
●
The damage of gear unit must be prevented. The crushes to the free input shafts could damaged into the
gear unit.
Package Transportation
;
●
There could be no loads on packages or the shelved surfaces should be prepared.
●
The necessary carrying equipments should be prepared.
●
The carrying and lifting equipments should be larged - enough to the
suffic
ient capacity.
●
The calculations should be made to the connection points and center of gravity.
●
If necessary, this information should be written on the package.
●
The carrying equipments (steel rope, belt, chain etc.) must be robust and suitable to the applied weight.
●
During the carrying process, the load centering could be done without oscillation.
Equipment Transportation
●
The connection carrying point should be appointed.
●
The carrying equipments (hook, chain, belt) must be prepared. To the alternative, pallet must be used for
the load-lifting.
●
If the Crane will be used, it could be lifted perpendicular from inside to the outside of the package.
●
If the forklift or palletized carrying equipment will be used, the product which removed from package should
be placed on the pallet.
●
The fork of the equipment should be carried out the way that gripped the pallet.
●
The weight must be lifted with slowly and constant speed and must take measure to the sudden oscillation.
ATTENTION!
Duri
ng the carrying process, the fixings like the lifting lug, hook, belt, rope, locked hook must
be sufficient to the load and have conformity certificate.The weights of the movable gear
unit/gear unit with motor have given in product cataloque.
NOTE!
In all carrying processes, there should be avoided both sudden movements and sudden
liftings.
ATTENTION!
If the connection tool is coupling between electric motor and gear unit, lifting eyebolt
should not be used.
