33
8. THE ELECTRICAL MOTOR AND BRAKE ANCHORAGE
8.1
Electrical Motor And Brake Connection
The connections must be made according to electric connection schema (If there is brake, it must be made
according to brake connection schema).
Must be sured that the supply voltage and frequency are the same as tag values.
Both the protective tag values and connection must be controlled.
If the motor is operated at the opposite direction, two stages must be changed.
Unused cable entries should be closed.
Not to have excessive load and stage failures, the protector must be used (stage protection or thermic etc.).
The motor protection must be set to the nominal current.
The gear unit and motor must be grounded against potential differences.
The electrical motor and/or brake connections must be made by the experienced electric technicians.
ATTENTION!
Wrong voltage or connection would harm to electrical motor or environment.
