Chevrolet Tavera Скачать руководство пользователя страница 79

Страница: 79 / 205

Seat belt inspection and care

• Periodically inspect belts, buckles, latch plates, retractors, and anchors for

damage that could lessen the effectiveness of the restraint system.

• Keep sharp edges and damaging objects away from belts.

• Replace belts if cut, weakened, frayed, or subjected to collision loads.

• Check that anchor mounting bolts are tightly fastened to the floor.

• Have questionable parts replaced.

• Keep seat belts clean and dry.

• Clean only with mild soap solution and lukewarm water.

• Do not bleach or dye belts since this may weaken belts.

Mirrors

Inside rearview mirror

To adjust move the mirror right or left and up or down.

Содержание Tavera














































































































































































































Результаты поиска

Содержание Tavera

Отзывы:

Похожие инструкции для Tavera

Бренды по названию

Популярные бренды

Chevrolet Tavera, Руководство пользователя

Результаты поиска

Содержание Tavera

Отзывы:

Похожие инструкции для Tavera

Бренды по названию

Популярные бренды