Chevrolet Tavera Скачать руководство пользователя страница 53

Страница: 53 / 205

Power window V

Windows on either side of the vehicle can be opened or closed with the switch at

the driver’s side. The windows operate only when the starter switch is “ON”.

To open any of the passenger’s windows, push down on the switch and hold it

down until the window reaches the desired position.

To close the window, pull back on the switch. Release the switch when the

window reaches to the position you want.

AUTO* - To open the driver’s window fully, push the switch firmly down till a click

is heard and release it.

When the lock switch of driver’s side is in “ON” position the passengers' window

control switch can not be operated even from driver's side. Press the lock switch

once again, and the power window will be unlocked.

The window on the passenger side can also be controlled with the switch on the

passenger side.

OFF

AUTO

Содержание Tavera














































































































































































































Результаты поиска

Содержание Tavera

Отзывы:

Chevrolet Tavera, Руководство пользователя, Страница: 53 / 205

Результаты поиска

Содержание Tavera

Отзывы: