Chevrolet Tavera Скачать руководство пользователя страница 78

Страница: 78 / 205

(Continued)
The shoulder portion of the front seat belt has an “Emergency locking retractor”

which is designed to lock during a sudden stop or impact. At other times, it is

designed to move freely with the seat occupant. To unfasten the belts, push in the

center of the buckle.
When not in use, seat belts can be stowed by letting them rewound in their

retractors. If needed, move the keeper along the belt to let the belt retract fully.

This will also put the latch plate within easy reach on the door pillar.

Lap belts

Bring the latch plate adjuster across your body and clip it into the buckle. When this is

done correctly you will hear a “click”.

Adjust the belt length by pulling the belt end. Make sure the belts are fitted firmly

across your waist.

Содержание Tavera














































































































































































































Результаты поиска

Содержание Tavera

Отзывы:

Похожие инструкции для Tavera

Бренды по названию

Популярные бренды

Chevrolet Tavera, Руководство пользователя

Результаты поиска

Содержание Tavera

Отзывы:

Похожие инструкции для Tavera

Бренды по названию

Популярные бренды