Chevrolet SMART MEDIA, Руководство пользователя

Страница: 78 / 88

How to Change the RSE Video Screen Settings
The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from
the on screen setup menu by using the remote control. To change a setting:
1. Press
z
.
2. Use
n
,
q
,
p
,
o
and
r
to navigate and use the setup menu.
3. Press
z
again to remove the setup menu from the screen.
Audio Output
Audio from the DVD player or auxiliary inputs can be heard through the following sources:
• Wireless headphones
• Vehicle speakers
• Vehicle-wired headphone jacks on the RSA system, if the vehicle has this feature.
The RSE system always transmits the audio signal to the wireless headphones, if there is audio available. See
“Headphones” earlier in this section for more information.
The DVD player is capable of outputting audio to the wired headphone jacks on the RSA system, if the vehicle has this
feature. The DVD player can be selected as an audio source on the RSA system. See Rear Seat Audio (RSA) System
in the owner manual.
When a device is connected to the A/V jacks, or the radio's auxiliary input jack, if the vehicle has this feature, the rear
seat passengers are able to hear audio from the auxiliary device through the wireless or wired headphones. The front
seat passengers are able to listen to playback from this device through the vehicle speakers by selecting AUX as the
source up front on the radio.
Video Screen
The video screen is located in the overhead console. When the video screen is not in use, push it up into its locked
position.
To use the video screen:
1. Push the release button located on the overhead console.
2. Move the screen to the desired position.
If a DVD is playing and the screen is raised to its locked position, the screen remains on; this is normal, and the DVD
continues to play through the previous audio source. Press
P
on the remote control or eject the disc to turn off the screen.
The infrared receivers for the wireless headphones and the remote control are located at the rear of the overhead console.
Notice: Avoid directly touching the video screen, as damage may occur. See “Cleaning the Video Screens” later in this
section for more information.
Remote Control