Chevrolet SMART MEDIA, Руководство пользователя

Страница: 76 / 88

Rear Seat Entertainment (RSE) System
The vehicle may have a DVD Rear Seat Entertainment (RSE) system. The RSE system works with the vehicle's audio
system. The DVD player is part of the front radio. The RSE system includes a radio with a DVD player, a video display
screen, audio/video jacks, two wireless headphones, and a remote control. See Overview for more information on the
vehicle's infotainment system.
Before Driving
The RSE is designed for rear seat passengers only. The driver cannot safely view the video screen while driving and
should not try to do so.
In severe or extreme weather conditions, the RSE system might or might not work until the temperature is within the
operating range. The operating range for the RSE system is above −20°C (−4°F) or below 60°C (140°F). If the temperature
of the vehicle is outside of this range, heat or cool the vehicle until the temperature is within the operating range of the
RSE system.
Parental Control
The RSE system may have a Parental Control feature, depending on the radio. To enable Parental Control, press and
hold the radio power button for more than two seconds to stop all system features such as: radio, video screen, RSA,
DVD and/or CD. While Parental Control is on,
Q
displays.
When the radio is turned back on, Parental Control is unlocked.
Headphones
A. Battery cover
B. Channel 1 or 2 switch
C. Power button
D. Volume control
E. Power indicator light
The RSE includes two 2-channel wireless headphones that are dedicated to this system. Channel 1 is dedicated to the
video screen movie, while Channel 2 is dedicated to RSA selections. These headphones are used to listen to media
such as CDs, DVDs, MP3/WMAs, DVD-As, radio (AM, FM, or XM equipped), any auxiliary source connected to rear A/V
jacks, or the front auxiliary input jack, if the vehicle has this feature. The wireless headphones have a power button,
channel 1 or 2 switch, and a volume control. Switch the headphones off when not in use.
Push the power button to turn on the headphones. An indicator light located on the headphones comes on. If the light
does not come on, the batteries might need to be replaced. Intermittent sound or static on the headphones can also be
an indication of weak batteries or if out of range of the signal. See “Battery Replacement” later in this section for more
information.
To adjust the volume on the headphones, use the volume control located on the right side.
Infrared transmitters are located at the rear of the RSE overhead console. The headphones shut off automatically to
save the battery power if the RSE system and RSA are shut off or if the headphones are out of range of the transmitters