Chevrolet Corvette2015, Руководство пользователя

Страница: 51 / 79

Black plate (50,1)
Chevrolet Corvette Infotainment System - 2015 - CRC - 8/25/14
50 Infotainment System
. Usually Phone and Audio
commands can be spoken in a
single command.
For example, “ Call Dave Smith
at work, ” “ Play ” followed by the
artist or song name, or “ Tune ”
followed by the radio station
number.
. Navigation destinations are too
complex for a single command.
First, state a command that
explains the type of destination
needed, such as I want
directions to an
“ address, ”
“ Navigate to an intersection, ” “ I
need to find a destination POI or
POI,
” or “ Directions to a
Contact." The system responds
with requesting more details.
After saying
“ destination POI, ”
only major chains are available
by name. Chains are businesses
with at least 20 locations. For
other POIs, say the name of a
category like
“ Restaurants, ”
“ Shopping Malls, ” or “ Hospitals. ”
There is no need to memorise
specific command words. Direct
commands might be more clearly
understood by the system. An
example of a direct command would
be
“ call <Phonenumber>. ”
Examples of these direct commands
are displayed on most of the
screens while a voice session is
active. If
“ go to phone ” or “ go to
phone commands Commands, ” is
stated, the system understands that
a phone call is requested and will
respond with questions until enough
details are gathered.
If the phone number has been
saved with a name and a place, the
direct command should include
both, for example
“ Call Dave Smith
at work. ”
Using Voice Recognition for
List Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list. A selection
can be made by manually selecting
the item, or by speaking the line
number for the item to select.
When a screen contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition screen functions
the same as a list on other screens.
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a screen during a voice
recognition session suspends the
current voice recognition event and
displays the prompt
“ Make your
selection from the list using the
manual controls, press
o
BACK on
the faceplate, or press the Back
screen button to try again.
”
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The screen returns to the screen
where voice recognition was
initiated.