Black plate (13,1)
Chevrolet Corvette Infotainment System - 2015 - CRC - 8/25/14
Infotainment System
13
To scroll through the favourites:
.
Drag anywhere on the screen
buttons along the bottom to raise
up the favourites. To close the
favourites, drag them down.
.
Slide a finger to the right or left
to scroll through each page of
favourites.
Tone Settings:
Press and hold a
screen button to save the current
tone settings as a favourite in the
tone settings screen. Press
Q
on
the bottom of the screen to display
Favourites. Press a screen button in
the favourite area to recall a
favourite tone setting.
The number of favourites displayed
is automatically adjusted by default,
but can be manually adjusted in the
Settings menu under Radio and
then Manage Favourites.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM and
DAB stations that broadcast RDS
information. With RDS, the
radio can:
.
Seek to stations broadcasting
the selected type of
programming
.
Receive announcements
concerning local and national
emergencies
.
Display messages from radio
stations
This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station may
broadcast incorrect information that
causes the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the current FM station, the station
name or call letters display on the
audio screen. RDS may provide a
program type (PTY) for current
programming and the name of the
program being broadcast.
When RDS signal information has
been detected, the metadata fields
will be updated on the screen
display to show the RDS data. The
radio text will be updated any time
new information is received.
The RDS fields on the screen will
show in the order of:
.
Frequency and /or RDS-PSN.
.
RDS text line one is the
information provided by the
broadcast.
.
RDS text line two and three is
RDS text. Line three is used only
if necessary, to wrap over from
the text on line two.
