Chen Hsong Ai-02, Руководство по эксплуатации

Страница: 101 / 124

6.2.9 Instructions for usage of timer inside the computer
No. Function Description
TM000 Used by system Time indication of cycle
TM001 Used by system Time indication of clamping
TM002 Used by system Time indication of carriage advance
TM003 Used by system Time indication of filling
TM004 Used by system Time indication of pressure holding
TM005 Delayed plasticizing
after the termination of
injection During the half/full automatic operation,
delayed plasticizing after the termination of
injection
TM006 Cooling time Time between the termination of automatic
injection and opening
TM007 Used by system Time indication of backlash before plasticizing
TM008 Used by system Time indication of plasticizing
TM009 Used by system Time indication backlash after plasticizing
TM010 Used by system Time indication of carriage retraction
TM011 Used by system Time indication of opening
TM012 Used by system Time indication of ejector
TM013 Middle cycle time Under the status of full automation, interval
time between the completion of eject and the
clamping of next cycle
TM014 Injection time Total injection time, excluding the time of
pressure holding
TM015 Time of Stage 1 of
pressure holding Action Time of Stage 1 of pressure holding of
injection
TM016 Time of Stage 2 of
pressure holding Action Time of Stage 2 of pressure holding of
injection
TM017 Time of Stage 3 of
pressure holding Action Time of Stage 3 of pressure holding of
injection
TM018 Time of Stage 4 of
pressure holding Action Time of Stage 4 of pressure holding of
injection
TM019 Time of Stage 5 of
pressure holding Action Time of Stage 5 of pressure holding of
injection
TM020 Time of purge and
plasticizing Plasticizing time setting during automatic
purge
TM021 Pause time of ejector Pause time after ejecting of automatic ejector,
conduct ejection retraction again after time
ends.
TM022 Time of core inserting A Time of core inserting A
TM023 Time of core pulling A Time of core pulling A
TM024 Time of core inserting B Time of core inserting B
TM025 Time of core pulling B Time of core pulling B
TM026 Time of core inserting C Time of core inserting C
TM027 Time of core pulling C Time of core pulling C