Chen Hsong Ai-02, Руководство по эксплуатации

Страница: 97 / 124

6.2.3 Heat Preservation Setting
：
For setting the heat preservation function, refer to the page (20).
Heat preservation means to keep the setting temperature of each stage in
the set percentage of the heat preservation.
For example: Set 20%, and the setting temperature is 250
℃
250
℃
x (100% - 20%) = 200
℃
When the setting temperature reduces to 200
℃
, keep it in the state of
temperature control.
6.2.4 Automatic/Semi/Automatic/Manual mode choosing
(1)
For hand operation, press the button
MAN 手动
. When start the power, the computer
will be automatically in the state of hand movement without pressing this button;
after carrying on the other operation, for example when back to the state of hand
movement or resetting the screen, press this button.
(2)
For half automatic operation, press the button
SEMI半自动
, and the machine is
operating in the half automatic state, when could use the opening and closing each
time of the safety door to confirm next circulating action. Please take notice that
when the rear safety door is opened, the oil pump power will be automatically cut off.
(3)
For fully automatic operation, press the button
AUTO 全自动
, and the machine is
operating in the automatic state. The operator could set the choice in advance, use
the re-circulating time, electric eye or manipulator returning, and confirm the next
circulating action.
* These three buttons could only choose one state, and forming condition
setting should be finished before choosing the state; meanwhile, only can
choosing it after confirming each action within the cycle comply with the
needs. If the LED light on any of the three buttons is flickering, that means
that materials in the computer have been locked, and can not be
changed; for the using method when the materials being locked, please
inquiry the special personnel responsible for the material revising.
6.2.5 Position, Speed and Pressure Material Setting
(1) Choose the button of needing action by use of page control button. When
pressing the button of needing action, the needing page could
immediately appear on the screen for setting or revising.