Chen Hsong Ai-02, Руководство по эксплуатации

Страница: 70 / 124

（
2
）
By pressing key, select item to be input, input corresponding
value, and
（
3
）
press key to complete setting.
Of which,
"AA"
：
Set mould thickness
"BB"
：
Minimum of mould clamping position
"CC"
：
Maximum of mould clamping position
"DD"
：
Preset of mould clamping position
"EE"
：
Preset of ejector position
"FF"
：
Preset of injection position
"GG"
：
Original value of mould clamping
"HH"
：
Original value of ejector
"II"
：
Original value of injection
Setting of origin data for potentiometer
，
move the potentiometer by hand up to
the minimum position
，
copy the
actual position data to the
origin ， then press key to complete setting. Again move the potentiometer by
hand up to the maximum position
，
copy
actual position data to
maximum location and then press key to complete the setting
。
Cyliner length
＝（
maximum position
－
minimum origin
）
/10
。
Others data on the screen
：
"A1"
：
mold thickness
，
After clamping end, measure the current thickness of the
mold and input the data 。
"A2"
：
During auto mold adjustment, the correspond position for adjusting half
of maximum clamping force 。
"A3"
：
During auto mold adjustment, the correspond position for adjusting
maximum clamping force
。
Those data are adjusted or preset before shipment 。 It is recommend not to
be adjusted by customer. Please consult service department.