ChemoMetec NucleoCounter, Руководство пользователя

Страница: 36 / 76

5 Operation of the NucleoCounter
19
Mode Description
2 The result is presented with two digits - ex.
1.2x10E6.
3 The result is presented with two, three or four
digits - ex. 1.2x10E4, 1.23x10E5, 1.234x10E6,
corresponding to a full representation of the
number of cells per ml.
4 The result is rounded off to an "even" number
according to a table, rounding-off to an "even"
number generally being within a 1/2 standard
deviation of repeatability (precision). NB! This
presentation does not compromise the performance
of the NucleoCounter since the rounding-off does
not affect any significant digit!
To change the representation of the results follow the
directions below (a letter or number enclosed with "<" and ">"
corresponds to a button on the keyboard).

Press <F> <2> <1> on the keyboard of the NucleoCounter.

Press enter <

>.

Press the mode-number of the desired representation, e.g.
<3>.

Press <

>.
5.4.2 Saving parameters
The representation of the results is changed with effect from
the next analysis. When the NucleoCounter is turned off, after
changing the status, the display will read “Save parameters?”,
"ENTER: Save" and "ESC : Cancel" (Figure 14).
Save parameters?

: Save
ESC : Cancel
Figure 14
The shut-down display when any parameters has been
changed.
By pressing the Enter key <

> the status will be saved and will
be in effect next time the NucleoCounter is switched on.
Pressing Escape <Esc> will not save the status and the
instrument will use the previous settings next time it is
switched on.