Chelsio Communications Terminator 6, Инструкция по установке и эксплуатации, Страница: 296 / 432

Chapter XX. Classification and Filtering
Chelsio Unified Wire for Linux 296
NAT Filtering
T5/T6 adapters support offloading of stateless/static NAT functionality i.e. translating source/
destination L3 IP addresses, and source/destination L4 port numbers. This feature is supported
with both LE-TCAM and Hash filters.
Syntax:
[root@host~]# cxgbtool ethX filter <index> action switch fip <source_ip> lip
<destination_ip> fport <source_port> lport <destination_port> nat <mode>
nat_fip <new_source_ip> nat_lip <new_destination_ip> nat_fport
<new_source_port> nat_lport <new_destination_port>
Where,
ethX : Chelsio interface.
source_ip/port : Source IP/port of incoming packet.
destination_ip/port : Destination IP/port of incoming packet.
new_source_ip/port : Source IP/port to be translated to.
new_destination_ip/port : Destination IP/port to be translated to.
mode : Combination of IP/port to be translated. all will
translate all 4-tuple fields. To see other modes, refer
cxgbtool manual page.
Examples:
•
Hash filter to translate all four tuples, viz. source IP, destination IP, source port and destination
port to new values:
•
Hash filter to translate source IP and source port to new values:
•
LE-TCAM filter to translate destination IP and destination port to new values:
This feature is only supported with filter action switch.
Note