Chelsio Communications Terminator 6, Инструкция по установке и эксплуатации, Страница: 161 / 432

Chapter X. iSCSI PDU Offload Target
Chelsio Unified Wire for Linux 161
Table of Chelsio Global Entity Settings
Key Valid Values
Default
Value
Multiple
Values
Description
iscsi_auth_order
“ACL”
“CHAP”
“CHAP”
No
Authorization order for login
verification on the target. Valid
only when a target’s
ACL_Enable=Yes
ACL : ACL first then CHAP
CHAP : CHAP first then ACL
Applies to Target(s) Only
DISC_AuthMethod
“CHAP”
“NONE”
None
No
To choose an authentication
method for discovery phase.
DISC_Auth_CHAP_Policy
“Oneway”
“Mutual”
“Oneway”
No
Oneway or Mutual (two-way)
CHAP
DISC_Auth_CHAP_Target
“<user id>”
:“<secret>”
Yes
CHAP user id and secret for the
target.
<user id> must be less than
256 characters. Commas “,”
are not allowed.
<secret> must be between 6
and 255 characters. Commas
“,” are not allowed.
The target user id and secret
are used by the initiator to
authenticate the target while
doing mutual chap.
NOTE: The double quotes are
required as part of the format.
DISC_Auth_CHAP_Initiator
“<user id>”
:“<secret>”
Yes
CHAP user id and secret for the
initiator.
<user id> must be less than
256 characters. Commas “,”
are not allowed.
<secret> must be between 6
and 255 characters. Commas
“,” are not allowed.
The initiator user id and secret
are used by the target to
authenticate the initiator.
NOTE: The double quotes are
required as part of the format.
iscsi_chelsio_ini_idstr
a string of
maximum of
255 characters
“ cxgb4i ”
No
To enable additional
optimization when Chelsio
adapters and drivers are used
at both ends (initiator and
target) systems.
Make sure the initiator name
contain the substring set in
iscsi_chelsio_ini_idstr when