Chelsio Communications Terminator 6 Скачать руководство пользователя страница 182 | Manualshive

Страница: 182 / 432

Chelsio Communications Terminator 6 Скачать руководство пользователя страница 182

Chapter X. iSCSI PDU Offload Target

Chelsio Unified Wire for Linux

182

specified iSCSI configuration file.

Will delete any non-

active targets’ configuration

from the specified file.

The -f option MUST be specified along with this
option.

-h

Display the help messages.

server=<IP
address>
[:<port>]

id=<isns entity id>
query=<query
interval>

Start the Chelsio iSNS client.

server=<IP address>[:<port>]

where

server

is

the iSNS server address. The port is optional
and if it‟s not specified it defaults to 3205. The
server with the ip address is mandatory and if it‟s
not specified the, the command will be denied.

id=<isns entity id>

where

id

is the iSNS entity

ID used to register with the server. It defaults to
<hostname>.

query=<query interval>

where

query

is the

initiator query interval (in seconds). It defaults to
60 seconds.

Examples:
chisns server=192.0.2.10

chisns server=192.0.2.10:3205 id=isnscln2
query=30

In the first example the minimum command set is
given where the IP address of the iSNS server is
specified.

In the second example a fully qualified command
is specified by also setting three optional
parameters. Here, the mandatory IP address and
the corresponding optional port number are
specified. Also set is the iSNS entity ID to
“

isnscln2

” as well as the query interval to 30

seconds.

chisns options

Options

Mandatory

Parameters

Optional

Parameters

Description

-h

Display the help messages.

server=<IP
address>
[:<port>]

id=<isns entity
id>

query=<query
interval>

Start the Chelsio iSNS client.

server=<IP address>[:<port>]

where

server

is the

iSNS server address. The port is optional and if it’s
not specified it defaults to 3205. The server with the
ip address is mandatory and if it’s not specified the,
the command will be denied.

id=<isns entity id>

where

id

is the iSNS entity ID

used to register with the server. It defaults to
<hostname>.

query=<query interval>

where

query

is the

initiator query interval (in seconds). It defaults to 60
seconds.

Examples:

«
...
180
181
182
183
184
...
»

Содержание Terminator 6

















































































































































































































































































































































































































































Отзывы:

Нет отзывов