Chelsio Communications Terminator 6 Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 432

Chelsio Communications Terminator 6 Скачать руководство пользователя страница 139

Chapter IX. LIO iSCSI Target Offload

Chelsio Unified Wire for Linux

139

d. Select

Device Drivers

→

Generic Target Core Mod (TCM) and ConfigFS

Infrastructure

.

e. Enable

Linux-iSCSI.org iSCSI Target Mode Stack

as a Module (if not already

enabled).

f. Select

Save

.

g.  Exit from the installation menu.
h.  Continue with kernel installation as usual.
i.  Boot  into  the  new  kernel  and  proceed  with  driver  installation  as  directed  in  the

Software/Driver Installation

section.

Kernel.org linux-4.9

i.  Download the stable version of 4.9 from kernel.org.
ii.  Untar the tar-ball.
iii.  Change your working directory to kernel package directory and run the following command

to invoke the installation menu.

[root@host~]# make menuconfig

iv. Select

Device Drivers

>

Generic Target Core Mod (TCM) and ConfigFS Infrastructure

.

v. Enable

Linux-iSCSI.org iSCSI Target Mode Stack

.

vi. Select

Save

.

vii. Exit from the installation menu.
viii. Apply the patch provided in the Unified Wire package.

[root@host~]# patch -p1 <
/root/<driver_package>/src/cxgbit/patch/iscsi_target.patch

ix. Continue with kernel installation as usual.
x. Boot into the new kernel and proceed with driver installation as directed in the

Software/Driver Installation

section.

Ubuntu 18.04.1

i. Clone Ubuntu Linux kernel source repository.

[root@host~]# git clone git://kernel.ubuntu.com/ubuntu/ubuntu-bionic.git

ii. Check the booted kernel version using

uname -r

iii. Find the git tag which matches the kernel version.

[root@host~]# cd ubuntu-bionic/

[root@host~]# git tag -l Ubuntu-* | grep -i 4.15.0-29
Ubuntu-4.15.0-29.31

«
...
137
138
139
140
141
...
»

Содержание Terminator 6

















































































































































































































































































































































































































































Отзывы:

Нет отзывов