Chelsio Communications Terminator 6 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 432

Chelsio Communications Terminator 6 Скачать руководство пользователя страница 126

Chapter VIII. NVMe-oF

Chelsio Unified Wire for Linux

126

Introduction

NVMe over Fabrics specification extends the benefits of NVMe to large fabrics, beyond the reach
and scalability of PCIe. NVMe enables deployments with hundreds or thousands of SSDs using
a network interconnect, such as RDMA over Ethernet. Thanks to an optimized protocol stack, an
end-to-end NVMe solution is expected to reduce access latency and improve performance,
particularly when paired with a low latency, high efficiency transport such as RDMA. This allows
applications to achieve fast storage response times, irrespective of whether the NVMe SSDs are
attached locally or accessed remotely across enterprise or datacenter networks.

1.1.

Hardware Requirements

Supported Adapters

The following are the currently shipping Chelsio adapters that are compatible with Chelsio NVMe-
oF driver:

  T62100-CR
  T62100-LP-CR
  T6425-CR
  T6225-CR
  T6225-LL-CR
  T6225-OCP^
  T6225-SO-CR^
  T580-CR
  T580-LP-CR
  T540-CR
  T540-BT
  T520-CR
  T520-LL-CR
  T520-BT

^ Memory-free; 256 IPv4/128 IPv6 offload connections supported.

1.2.

Software Requirements

Linux Requirements

Currently the NVMe-oF driver is available for the following versions:

  RHEL 7.5, 3.10.0-862.el7
  RHEL 7.5, 4.14.0-49.el7a.aarch64 (ARM64)
  RHEL 7.4, 3.10.0-693.el7
  SLES 15, 4.12.14-23-default

«
...
124
125
126
127
128
...
»

Содержание Terminator 6

















































































































































































































































































































































































































































Отзывы:

Нет отзывов