Electric Induction hobs Chef’s
EH-DIH386 & EH-MIX386
22
Fig. 11: Select outer circuit of radiant burner by press on
“
”
key.
13. Operating the timer
13.1 Basics
-
The timer function module provides a timer for each of both cooking zones of a
Touch Control.
-
This can be implemented as cooking zone timer. The three 7-segment
displays serve as displays of the time.
13.2 Setting timer
-
Touching a timer key (13) to select timer mode.
-
If the timer has been switched off, the next pressing of the timer key will activate the
first timer mode according to the operation sequence.
Fig. 12:
Turn on timer by touching the symbol timer.
13.3 Timer display
-
Whether a timer is programmed to control a cooking zone, it is indicated by
Timer indicator LED (19).
-
A timer LED flashing in accordance to scheme 1 signalises that the value of the 7-
segment displays refers to the timer and can be edited.
-
A statically shining timer indicator LED means that the relevant timer had
been programmed and that its countdown is running. The remaining time is shown
on the 7-segment displays.
-
When the timer is being programmed/paused, the 7segment statically display the
time value of the timer (the dot on 7segment 20 is flashed).
