Page 6
INSTALLATION
UNPACKING:
Unpack the slicer immediately after receipt. If the machine is found to be damaged, save the packaging
material and contact the carrier within fifteen (15) days of delivery. Immediately contact your source of
the equipment.
You should receive with the slicer, rubber feet, oil, warranty card, safety tips card, and an owner and
operator instruction manual. Contact Globe or your local supplier if you did not receive all of these
materials.
TO AVOID SERIOUS PERSONAL INJURY PROPERLY
INSTALL SLICER IN ADEQUATE WORK AREA
•
ALWAYS install equipment in a work area with adequate light and space.
•
ONLY operate on a solid, level, nonskid surface.
•
NEVER bypass, alter, or modify this equipment in any way from its original condition.
•
NEVER operate slicer without all knife guards and covers securely installed.
•
NEVER operate slicer without all warnings attached.
INSTALLATION:
1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation
and operation if you have any questions or do not understand anything in the manual. Contact your
local representative or Globe first.
2. Remove the slicer from the corrugated box.
3. Make sure the rubber feet are firmly tightened.
NEVER USE SLICER WITHOUT RUBBER FEET INSTALLED.
4. Select a location for the slicer that has a level, solid, nonskid surface and a well-lighted work area
that is away from children and visitors.
USE AT LEAST TWO PEOPLE TO LIFT THE SLICER UP TO THE OPERATING LOCATION.
NEVER ATTEMPT TO LIFT THE SLICER ALONE.
