Page 14
SIMPLE MAINTENANCE AND REPAIR
DO NOT USE VEGETABLE OIL TO LUBRICATE SLICER.
VEGETABLE OIL WILL DAMAGE THE SLICER!
Sharpener Shafts
It is necessary to lubricate the sharpener shafts with Globe oil weekly.
1. Loosen the sharpener release knob.
2. Lift the sharpener and apply oil to the main shaft that the sharpener
rotates on (Fig. 14-1).
3. Move the sharpener up and down to distribute the oil.
4. Tilt the slicer on its back end.
5. Put several drops of Globe oil on the shaft behind each sharpening stone.
6. Tilt the slicer back to its normal position.
7. Wipe off any excess oil that drips onto the slicer.
End Weight Slide Rod
The end weight slide rod should be lubricated weekly with a few
drops of Globe oil.
1. Apply a few drops of Globe oil to the slide rod (Fig. 14-2).
2. Slide the end weight up and down to distribute the oil.
Globe recommends that an authorized Globe service
company perform all adjustments and major maintenance.
By adequately maintaining your slicer,
it will provide years of dependable service.
Figure 14-1
Figure 14-2
Slide Rod
Main Shaft
