Checkpoint Evolve F10, Руководство по установке

Страница: 3 / 71

F10 Installation Manual Rev. *60
3 of 71
Statements
•
The device(s) may only be used for the intended purpose designed by for the manufacturer.
•
Unauthorized changes and the use of spare parts and additional devices which have not been sold or
recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures
shall exclude any liability by the manufacturer.
•
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the
device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the
manual or automatically set parameters for a device or for an incorrect application of a device.
•
Repairs may only be executed by the manufacturer.
•
Installation, operation, and maintenance procedures should only be carried out by qualified personnel.
•
Use of the device and its installation must be in accordance with national legal requirements and local
electrical codes.
•
When working on devices the valid safety regulations must be observed.
•
Before touching the device, the power supply must always be interrupted. Make sure that the device is
without voltage by measuring. The fading of an operation control (LED) is not an indicator for an
interrupted power supply or the device being out of voltage!
•
The installer or licensed electrician must follow all NEC and local codes.
•
All wires routed in the floor per article 725 must be Class 2 and be UL Listed. UL Recognized AWM may
be employed, provided it is enclosed in Conduit or ENT.
•
The F10 is not to be installed in Wet Locations. For indoor use only.
•
Checkpoint is not responsible for or warrant any repairs or rework to the flooring during or after the
installation of the antenna.
Guide Conventions
Document conventions are described below:
This is a Warning icon. When it appears, it indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
Caution: This is a Caution icon. When it appears, it indicates a potentially hazardous situation which
if not avoided, could result in property damage or malfunction of equipment.
Note: This is a Tip icon. When it appears, the corresponding text indicates a helpful note or tip when
using the feature.
For all measurements:
•
To meet both CE and FCC requirements, all measurements will be listed in the following format:
Metric [Imperial], for example: 46cm [18in] or 0.9m [3ft].
•
Where non-S.I. units are applicable, such as 6’ x 4’ or 3/16”, the format in this case is Unit
(metric).
Where on-screen computer instructions are given:
Button Name - This describes a button or an on-screen command or drop-down selection.
For example, the <DONE> button is represented in this document as Done .
Key Name - This describes a keystroke on a keyboard. For example, Ctrl represents the control key.