Chauvet Quad-9, Руководство пользователя

Страница: 15 / 32

Operation
COLORado™ Batten Quad-9 Tour User Manual Rev. 1 -11-
Master/Slave
The Master/Slave mode allows a group of COLORado™ Batten Quad-9 Tours (slaves)
to simultaneously duplicate the output of another COLORado™ Batten Quad-9 Tour
(master) without a DMX controller.
1. Set each of the slaves:
a. Go to RUN .
b. Select SLAV .
2. Set the master product:
a. Set the running mode to DMX (see DMX Control ).
b. Select an auto or custom program as explained in Auto Programs , or a static
mix of colors as explained in Static Color .
•
The master is the product that runs an automatic program, a custom program, or in
Static Color mode.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Color Settings
The color setting determines how the product generates the white color based on
various RGB settings.
1. Go to the
SET main level.
2. Go to the COLR programming level.
3. Select OFF , RGBW , or UC .
OFF:
When all the RGB faders are set to 255 , the output is maximum, although
the resulting white color may not be balanced.
RGBW:
When all the RGB faders are set to 255 , the resulting output is defined by
the configured white color (see White Calibration ).
UC:
When all the RGB faders are set to 255 , the output matches that of less
efficient products (Universal Color).
Dimmer Curves
This setting provides you with four options to simulate the dimming curve of an
incandescent light product.
1. Go to the
SET main level.
2. Go to the DIMX programming level.
3. Select the desired dimmer curve ( OFF , DIM1 , DIM2 , DIM3 , or DIM4 ).
OFF:
The output is proportional (linear) to the dimmer and RGBW channel
values.
DIM1 – DIM4:
The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve,
DIM1 being the fastest and DIM4 the
slowest.