Chauvet Quad-9, Руководство пользователя

Страница: 14 / 32

Operation
-10- COLORado™ Batten Quad-9 Tour User Manual Rev. 1
Loss of Signal Setting
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the
SET main level, and select DERR .
a. Select SAVE to make the product use the last command used when the signal
is lost.
b. Select BLAK to turn off the all the LEDs when the signal is lost.
Static Color
The Static Color mode allows for RGBW color mixing without a DMX controller.
1. Go to the
STAT main level.
2. Select the desired color RED (red), GREN (green), BLUE (blue), or WHIT (white).
3. Select the desired color value ( 000 – 255 ).
4. Repeat the steps for each color.
5. Select
STRB .
6. Select the desired frequency 00 – 20 (0–20 Hz).
Auto Programs
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to
AUTO .
2. Select the desired auto ( AT. 01 – 10 ) or custom program ( PR. 01 – 10 ).
3. Select the desired speed at which the chosen program will run ( P. 000 – 255 ).
You cannot edit any of the auto programs ( AT.01 – 10 ); however, you can edit the custom
programs ( PR.01 – 10 ). See Edit Custom Programs below for details.
Edit Custom
Programs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the
EDIT main level.
2. Select the desired auto program ( PR. 01 – 10 ).
3. Select the desired scene ( SC. 01 – 30 ).
4. Select the desired color or effect RED (red), GREN (green), BLUE (blue),
WHIT (white), STRB (strobe), TIME (step duration), or FADE (fade duration).
5. Select the value 000 – 255 for colors (0–100%) and durations (fast to slow), or
00 – 20 for the strobe (0–20 Hz).
6. Repeat the steps for other colors or effects.
7. Return to the scene level (
SC. 01 – 30 ).
8. Repeat the settings of colors and effects for the other scenes.
Do not disconnect the product from power before completing the editing process.
Make sure to complete all steps when editing custom programs; otherwise, the
COLORado™ Batten Quad-9 Tour may lose any incomplete custom programming.
Strobe Personality
This setting allows you to select the classic (01–20 Hz) or special
(random/slow/fast) strobe personalities.
1. Go to the
SET main level.
2. Go to the STRB programming level.
3. Select a strobe personality ( SPEC or CLAS ).