Chauvet Quad-9, Руководство пользователя

Страница: 10 / 32

Setup
-6- COLORado™ Batten Quad-9 Tour User Manual Rev. 1
3. Setup
AC Power
The COLORado™ Batten Quad-9 Tour has an auto-ranging power supply that works
with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power
requirements for each COLORado™ Batten Quad-9 Tour, refer to the label affixed to the
product. You can also refer to the
Technical Specifications section in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download
Sizing Circuit Breakers from the CHAUVET®
website: www.chauvetpro.com .
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORado™ Batten Quad-9 comes with a power input cord terminated with a
Neutrik® powerCON® connector on one end and an Edison plug on the other end (U.S.
market). If the power input cord that came with your product has no plug, or if you need
to change the Edison plug, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Fuse Replacement
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
1. Disconnect this product from the power outlet.
2. Using a #2 Phillips screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.