Operation
-14-
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
Resetting Calibration
Defaults
This setting allows you to reset the product’s default values set in the
CAL1
and
CAL2
programming levels. (See
Setting the White Color
for
CAL1
settings and
Calibrating the
White Color
for
CAL2
settings.)
1. Go to the
CAL
main level.
2. Enter the passcode (see
Passcode
).
3. Go to
CALR
.
4. Enter the passcode (see
Passcode
).
5. Wait for the reset process to finish.
Setting the
White Color
This setting allows you to select and edit the color temperature of the white used in
Channel 6 when in the
TOUR
mode or Channel 11 when in
TR16
mode.
1. Go to the
CAL
main level.
2. Enter the passcode (see
Passcode
).
3. Go to the
CAL1
programming level.
4. Select a white color (
WH.01
–
11
).
5. Select a color
RED
(red),
GREN
(green),
BLUE
(blue), or
WHIT
(white).
6. Select a color value
000
–
255
(0–100%).
7. Repeat for the other colors.
Calibrating the
White Color
This setting allows you to calibrate the white color when
RGBW
and the DMX controller’s
red, green, and blue faders are set to
255
.
1. Go to the
CAL
main level.
2. Enter the passcode (see
Passcode
).
3. Go to the
CAL2
programming level.
4. Select the desired color
RED
(red),
GREN
(green), or
BLUE
(blue).
5. Select a desired color value
000
to
255
(0–100%).
6. Repeat for the other colors.
When selecting CAL > CAL2 >, you will only be able to define the values of red, green,
and blue.
The values of RED (red), GREN (green), and BLUE (blue) configured from CAL >
CAL2 > will define the color temperature shown when the RGB faders are set to
255 if SET > COLR > RGBW is active.
Содержание Quad-9
Страница 1: ...User Manual ...
