Chauvet COLORado 6p, Быстрый старт

Страница: 8 / 20

Setup
6 COLORado™ 6p Quick Start Guide Rev. 03
Mounting
Read the safety notes at the beginning of this guide and follow their
recommendations before mounting this product.
Orientation You can mount the COLORado™ 6p in any safe position, whether as a
single module on in stacks to form strips or panels.
Rigging CHAUVET® recommends following the general guidelines below when
mounting this product.
•
When selecting an installation location, consider ease of access to the
product for operation, programming adjustments and routine
maintenance.
•
Always mount this product making sure that there is adequate room
around it for ventilation, especially when stacking fixtures.
•
Do not expose this product to extreme temperature changes.
•
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate
this product at a higher temperature.
•
If mounting this fixture overhead, make sure that the location where you
are mounting it can support its weight. Please see the
Technical
Specifications section of this guide for the weight requirement of this
product.
Procedure
This fixture includes a mounting yoke to which you can attach one or two
rigging clamps. You must supply your own “C” or “O” clamps and make sure
that they are capable of supporting the weight of this fixture. CHAUVET®
recommends using at least two mounting points per fixture.
Use the stacking thumbscrews and slots to interlock two or more fixtures.
Download the COLORado™ 6p user manual for more details on this.
Product
Mounting
Diagram
Mounting clamp
(Not included)
Safety cable
(Not included)
Stacking
thumbscrew Stacking
slot