Chauvet COLORado 6p, Быстрый старт

Страница: 4 / 20

Before you Begin
2 COLORado™ 6p Quick Start Guide Rev. 03
Safety
Notes
Please read the following notes carefully because they include important
safety information about the installation, usage and maintenance of this
product.
The COLORado™ 6p has no user serviceable parts inside it. Any
reference to servicing this fixture you may find within this guide or the
downloaded user manual will only apply to properly CHAUVET®
certified technicians. Do not open the housing or attempt any repairs
unless you are one of them.
Please refer to all applicable local codes and regulations for proper
installation of the COLORado™ 6p.
Keep this guide and the user manual for future consultation. If you sell
the COLORado™ 6p to another user, make sure that they also receive
these documents.
Personal
Safety
•
Avoid direct eye exposure to the light source while the fixture is on.
•
Always disconnect the COLORado™ 6p from its power source before
servicing.
Mounting
and Rigging
•
This product is for outdoor use (IP66). However, do not submerge it.
•
Make sure there are no flammable materials close to this product while
operating.
•
When hanging this fixture, always secure it to a fastening device using
a safety chain (not provided).
Power and
Wiring
•
Never connect the COLORado™ 6p to a dimmer pack.
•
Make sure this product’s housing or cable are not cracked, crimped or
damaged.
•
Never disconnect this product by pulling or tugging on the power cable.
Operation
•
In the event of a serious operating problem, stop using this product
immediately!
In the unlikely event that your COLORado™ 6p may require service,
please contact CHAUVET® Technical Support.
Expected
LED
Lifespan
Under normal conditions, the LED’s lifespan can be of 40,000 to 50,000
hours. High temperature, like that reached when LEDs are packed in
clusters, may reduce this lifespan. To extend the LEDs lifespan expectancy,
lower the operational temperature by improving ventilation and reducing the
external temperature, as well as limiting the overall projection intensity.