Chauvet COLORado 6p, Быстрый старт

Страница: 7 / 20

Setup
COLORado™ 6p Quick Start Guide Rev. 03 5
3. Setup
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting the COLORado™ 6p to the proper
voltage, as per the specifications in this guide, the product’s manual or on
the product’s sticker.
Always connect the COLORado™ 6p to a protected circuit with an
appropriate electrical ground to avoid the risk of electrocution or fire.
To determine the power requirements for the COLORado™ 6p see the
sticker affixed to the product. Alternatively, you may refer to the Technical
Specifications chart in the Technical Information chapter of this guide.
The listed current rating indicates the maximum current draw during normal
operation. Please refer to the
Sizing the Circuit Breakers section in the
Appendix chapter of the COLORado™ 6p user manual.
Never connect the COLORado™ 6p to a rheostat (variable resistor) or
dimmer circuit, even if the rheostat or dimmer channel serves only as
a 0 to 100% switch.
Fuse
Replacement
The COLORado™ 6p has a sealed housing to prevent dust and water from
entering it (IP66 rating). Therefore, there is no fuse holder on the outside of
this fixture’s housing.
Power
Linking
This fixture supports power linking from one COLORado™ 6p to another
COLORado™ 2 fixture. Each fixture ships with IP-66 proprietary power
input cables, and a power adapter to Male Edison connector.
AC Plug Depending on the market and the application, the COLORado™ 6p may
require an AC plug other than the Edison type. Use the table below to install
a different AC plug for the COLORado™ 6p
Connection Wire (US) Wire (Europe) IP66 Pin
AC Live Black Brown 1
AC Neutral White Blue 2
AC Ground Green/Yellow Green/Yellow 3
F
emale IP66
(Power Output/Linking)
Male IP66
(Power Input)