Chattanooga Intelect TENS, Инструкция по эксплуатации

Страница: 15 / 30

4.3 Connect lead wires to unit:
Before proceeding to this step, be sure the unit is turned OFF. Holding the insulated portion of the lead wire
connector, insert the angled-"L" plug into the receptacle on the top of the main unit. Ensure the lead wires are
inserted correctly.
The unit has two output receptacles which are controlled by Channel 1 and Channel 2 Amplitude Control knobs at
the top of the unit. You may choose to use one channel with one pair of lead wires or both channels with two pairs
of lead wires. Using both channels gives the user the advantage of stimulating two different areas at the same time. CONNECTING THE STIMULATOR
4.2 Connect electrodes to lead wires:
Insert the lead wire connector into electrodes connector (standard 0.08 inch female connection).
MAKE SURE NO BARE METAL OF THE PINS IS EXPOSED.
Caution:
* Always use the electrodes with the requirements of the EN60601-1 and EN60601-2, such as with CE mark, or which are
legally marketed in the US under 510(K) procedure.
12
11
Self-adhesive
Electrodes Pads
Angle"L"-shape
plug