Chatillon DFE I, Руководство пользователя

Страница: 32 / 85

DF II Series User Manual
31
SElECT NOMINAl vAlUE
Use the F1 key to specify the Nominal Value or the
Bandwidth. When Pass-Fail is ON, the gauge will
start at the Nominal Value position.
Use the UP and DOWN navigation key to increase
or decrease the Nominal Value. The value will
increase by the increment selected upon each key
press. Note that the gauge will automatically
calculate the High and Low Limits based on the
Nominal Value entered and the Bandwidth value.
SElECT bANDWIDTh
Use the F1 key to specify the Bandwidth. the
Bandwidth is expressed as a percentage of the
Nominal Value. The maximum allowable band-
width is 50%.
Use the UP and DOWN navigation key to increase
or decrease the Bandwidth. The value will increase
by the increment selected upon each key press.
Note that the gauge will automatically calculate the
High and Low Limits based on the Bandwidth en-
tered and the Nominal value.
Select enter when you are satisfied with your
calculated limits based on your Nominal Value and
Bandwidth.
SElECTING INCREMENTS
Increments are associated with the numeric values
displayed by the gauge during setup. You select
the increment you want to use to adjust your setup
values. Increments are provided in values
corresponding to the gauge capacity and units of
measure. Increment values available are:
n 0.001
n 0.01
n 0.1
n 1.0
n 10.0
n
100.0
Selecting an increment of 10.0 will adjust the setup
numeric value by “tens”. Selecting the increment
0.1 will adjust the setup numeric value by “tenths”.
You select increments using the RIGHT and LEFT
arrow keys on the navigation pod. Selecting the
RIGHT arrow increases the increment value.
Selecting the LEFT arrow decreases the increment
value.